Undoubtedly, a shower caddy is a need in every second house. While cleaning, you don’t have to carry your utensils anymore. Shower caddies are attached with a sticky adhesive to avoid any crisis. Yet there’s a windfall of shower caddies. A few shower caddies will start damaging the showerheads. So you may need to replace your shower caddy soon.
While withdrawing your old shower caddy, you might be concerned about the muggy adhesive on shower walls. Here the problem is, how do you remove shower caddy adhesive? Well, don’t worry. In this article, you’ll get the most promising ways to eradicate shower caddy adhesive from your bathroom.
So, let’s dive in and explore the best tactics to eliminate these sticky sealants. Here we go.
Shower Caddy Adhesive Removal Techniques
Here are the easiest ways to cope with shower caddy adhesives.
By Petroleum Jelly
The most convenient method to get rid of shower caddy adhesive is using petroleum jelly. You need to follow the given steps accordingly, and you’ll see tremendous results.
1- Eliminate Dirt
Before starting the remedy, you’ll have to clear the affected area with a soft wet cloth to remove all the dirt. When you remove the shower caddy, debris and unwanted bacteria may get stuck in the gummy place.
The presence of land may also slow down the cleaning procedure.
2- Put On Safety Gloves
Putting on gloves is mandatory to commence the adhesive removal strategy. Gloves will also protect you from the direct interaction of microorganisms with your skin. The harmful bacteria in shower walls may cause a lot of health issues.
3- Apply Petroleum Jelly
Here comes the time to start your cleaning technique. You can apply the petroleum jelly with your hands to the adhesive portion. Most of you may avoid using your hands on the shower wall.
You can also utilize a utensil to put the petroleum jelly on the entire adherent. Leave the petroleum jelly on the affected area for at least one hour.
You’ll be amazed that the petroleum jelly will absorb the gummy structure and assist you in removing the shower caddy adhesive efficiently.
4- Use A Paper Towel
Now, you can wipe out the petroleum jelly and the adhesive. A paper towel will help remove the sticky structures from your shower wall. If you can’t get a paper towel, you can use a rag.
Mix hot water and detergent, and clean your shower wall by scrubbing.
Via Cream Of Tartar & Hydrogen Peroxide
If you failed to remove the shower caddy adhesive by petroleum jelly, you could use the cream of tartar and hydrogen peroxide technique.
Let’s jump in and see a step-by-step guide to peel off the gummy adhesive.
1- Make A Paste
The initial step is to make a paste using the cream of tartar and hydrogen peroxide. Here are the detailed instructions.
- Take a container and pour 2 tsp of hydrogen peroxide into it.
- Put in approximately 6 tsp of cream of tartar.
- Blend the mixture adequately.
When the mixture turns out as a thick paste, it is prepared.
2- Time To Apply
Take an adequate portion of the hydrogen peroxide and cream of tartar paste and apply directly on the adhesive. Leave the paste for at least one hour and then see the results.
3- Use Plastic Wrap
You can also use plastic wrap to cover the shower wall where you spread the paste. Covering the area will result in more satisfactory results for the paste.
The mixture of hydrogen peroxide and the cream of tartar will absorb the entire sticking and loosen its grip on the shower wall.
4- Remove The Paste
Now, take a cloth and soak it in cold water. Remove the plastic wrap and rub the adhesive sufficiently. Scrubbing will put off the entire gummy structure from the shower wall.
Clean the cloth and start cleansing the shower wall again until you get a clean wall.
By Baking Soda
Hanging a new shower caddy can be a big trouble if you haven’t removed the recent caddy’s adhesive. You can remove the gummy area with the help of baking soda without purchasing any strong chemicals.
1- Scrubbing
The first step is to scrape off the recent adhesive with the help of any flat tool. Scrubbing will remove the glue from the shower wall.
You must be careful while scrapping the shower caddy adhesive from the affected area. Grating off the sealant will help you to fix a new shower caddy accurately.
2- Pour Baking Soda
After rubbing off the shower caddy adhesive, now scatter a considerable amount of baking soda on the shower wall. You’ll be completely stunned by the outcomes of baking soda. It will remove all the remaining gummy structures on the shower wall.
3- Hot Water
You must be thinking about how baking soda will remove the whole adhesive. Hot water will act as a punch for gluey here. You’ll have to spray hot water to paste baking soda on the shower wall. Now, leave the damp paste for more than an hour.
4- Remove The Residue
You can remove the remaining adhesive with the help of a scrapper. Continue scratching the shower wall until you can’t see any glue residue. You’ll see a clear place in a short time.
If the adhesive still can’t come off, you can repeat the whole procedure.
By Vinegar
If you have tried all the tactics and still a little amount of remaining adhesive is disturbing you, don’t worry.
Vinegar and a paper towel will be miraculous for your issue.
- Dip a paper towel in vinegar until it’s downright humid.
- Now, you’ll place the wet paper towel on the sealant.
- Leave the paper towel for 3-4 hours.
- You’ll notice that the towel is completely dried.
- Pour a little amount of vinegar on the dried towel.
- Grab a sponge and rub the area until you see the adhesive coming out of the wall.
- And here you go. You’re done with cleaning your shower wall.
Bottom Line
Now you have various solutions for your shower caddy adhesive trouble. You can remove the remaining glue from the shower wall using any method. So, if you’re struggling to fix the new shower caddy, take a breath. Grab the essential items and start scraping off the adhesive right now.